Premier ULTRA 5 User Manual download pdf (Page 12)

USER MANUAL PREMIER & ULTRA SERIES

CONTROL PANEL LAYOUT CONT.

9. - / STOP Key

Function during cycle Terminates the program cycle completely. The cycle immediately switches to the ventilation

function.

Function in program mode` Lower the value of the selected function within the program selected in the program mode.

10. Vacuum meter

Displays the pressure in the vacuum chamber. See the following table for the relationship between the vacuum meter

and the percentage vacuum.

Position vacuum meter Vacuum percentage

0.2 20

0.3 30

0.4 40

0.5 50

0.6 60

0.7 70

0.8 80

0.9 90

- 1.0 99+

11. ON/OFF Switch

The ON/OFF switch is used to turn the machine on and off before and after operation. The switch turns on all units in the

machine. Caution, the switch does not completely remove all power from the machine.

OPERATION MODE

When the machine is turned on, the machine switches to operation mode after displaying the two codes (see page 4).

The operation mode is the standard setting of the control panel for packaging products. Set values cannot be modiﬁ ed in

operation mode.

With the PROG key and function selection keys the set values within the various programs can be viewed. If the

machine is ready to package a product (the product is already in the chamber), then all that needs to be done is to

choose the program (PROG key) and close the lid. The program cycle starts automatically running through the set

functions in the program.

Description of the program cycle for digital time control

1. Select the program number with the PROG key and the small display.

If the selected programme is programmed with the active gas ﬂ ush function then a dot appears in the lower right hand corner

of the small display.

2. Close the lid.

3. Vacuum function The machine starts to vacuum the chamber.

The light in front of [VACUUM] goes on.

Large Display: decrementing time per second starting at the time set (max. 99 sec.).

Vacuum meter starts increasing to the left.

4. Gas ﬂ ush function Once the vacuum function has completed then the gas ﬂ ush function starts to ﬂ ush gas into

(if installed) the vacuum chamber.

The light in front of [GAS] goes on.

Large Display: decrementing time per second starting at the time set (max. 99 sec.).

Vacuum meter starts decreasing to the right.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments

Premier ULTRA 5 User Manual Page 12

Comments to this Manuals